Impresora 3D de pellets industriales de alta temperatura y alta velocidad IEMAI
EXTRUSORA DE PELLETS IMPRESORA 3D
JET RÁPIDO 1500
Volumen de construcción: 1500 * 1500 * 1500 mm
Temperatura de impresión: hasta 500 °C
Temperatura de la cama caliente: hasta 120 °C
Sistema de extrusión: similar a la extrusora tradicional, tres regiones de calentamiento pueden mejorar el rendimiento de las piezas impresas.
La mayoría de los gránulos en el mercado: PLA, CF-PLA, ABS, ASA, ASA-GF, TPU, PETG, PA, CF-PA, PC, CF-PC, PP, PEEK, PEKK...
Impresora 3D de pellets industriales de alta temperatura y alta velocidad IEMAI
1. Gran espacio de impresión
With 1500*1500*1500 mm build volume, and it is a fully enclosed industrial 3D printer for producing fullscale, large parts including
functional prototypes, factory tooling, patterns and molds, and end-use parts.
2. Menor costo
Cut your material costs by more than 60% by printing with pellets and recycled plastics instead of filament.Pellet extrusion system extrudes directly from plastic resin instead of filament, eliminating part of the manufacturing process,as you know the cost of filament is much higher than pellet,so the pellet printing cost can be much more affordable. Pellet Extrusion enables material cost savings up to nearly 10 times compared to traditional 3D printing filaments.
3. Velocidad de impresión más rápida
Liquid Cooled Single Screw With Three Temperature Regions ,The maximum printing temperature is 500, which can print most plastic materials.The printing speed of pellet extrusion system is much higher than 3D filament extrusion system. Use our standard 4mm nozzle the extrusion rate of our pellet extruder is up to 6KG per hour.
4. Plataforma de absorción de vacío
Vacuum adsorption is adopted so that there is no limit to the materials that can be used on the platform. You can use FEI, PC
material platform. And after printing we can use the platform cart to load out the paltes and take out the prints .
5. Alimentación automática
Hay dos detectores láser en el puerto de alimentación del cabezal de impresión, y cuando detecta que no hay material, ordenará a la máquina que lo alimente.
6. Calefacción de la zona de cama caliente
The platform can be heated in different areas, as shown in the figure.
When printing items with relatively small chassis,can only open 1 area,saving more power .
7. Impresión y monitoreo de control wifi
Pre-installed remote monitoring software connected to internal cameras, enabling you to view printing status and control machines
in real-time.Wifi control the printing
Haga clic en el hipervínculo de la foto para ver la demostración del caso real de nuestra impresora 3D.
Dongguan Iemai Intelligent Technology Co.,Ltd is a high technological enterprise which specialized in producing 3D printers and 3D filaments in the Pearl River Delta of China. IEMAI 3D develops, manufactures, and sells high performance functional materials and Industrial 3D printing solutions.
IEMAI is committed to the highest manufacturing design and quality standards where all 3D printers have received ROHS and CE certifications. IEMAI is committed to the research and development of core technology, and we have software copyright and invention patents.
Today, IEMAI's 3D printing solutions cover the aerospace, automotive, oil and gas, medical, dental and electronics manufacturing industries.
Our Main products:
1. Large printing size industrial series: YM-NT-750, YM-NT-1000.
2. High performance materials high temperature 3D printing series: MAGIC-HT-M, MAGIC-HT-L, MAGIC-HT-PRO, MAGIC-HT-MAX, YM-HT-750.
3. Desktop 3D printers: MAGIC-L , YM-S400, YM-S600. MAGIC-M, MAGIC-S, MAGIC-PRO.
4. 3D Letter printing machine: YM-AUTO-600, YM-4020 , YM-600.
5. 3D printing consumables, including PEEK, PEI ( ULTEM ) , PPSU , PLA, ABS, PETG, PC, CARBON FIBER, TPU , TPE, PVA, HIPS, METAL,PA6, etc..
Our certification:
* 10+ Patents.
* CE , Rohs certification.
* 1 software copyright
* Our trademark has been authorized by China, EU, and the United States.
* China High-tech Enterprise Certificate
Confianza de
IEMAI tiene altos estándares de calidad para los productos. Nuestras impresoras 3D y materiales cuentan con CE y ROHS.
Y tuvimos el pase ISO9001-2015
.jpg)
.jpg)
| FAST-JET-1500 | |||
| Tecnología | Impresora 3D de partículas | Temperatura máxima del cabezal de impresión: | 500°C |
| Volumen de impresión: | 1.5 * 1.5 * 1.5M | Temperatura máxima de la cama caliente: | 120°C |
| Diámetro del pellet: | los 2MM ~ 6MM | Velocidad de impresión: | 6Kg por Hopur |
| Material del filamento: | PLA, CF-PLA, ABS, TPU, PETG, ASA, PA, CF-PA, PC, CF-PC, PP... | Material de la plataforma: |
placa de aluminio |
| Extrusora | Un solo tornillo refrigerado por líquido con tres regiones de temperatura | Plataforma fija : | Aspiración endouterina |
| Diámetro de la boquilla: | 2,0 mm (estándar) 1.0 3.0 mm (seleccionable) | Recuperación de fallas de energía: | Sí |
| Material de la boquilla: | Aleación de cobre (estándar) acero templado u otros (Seleccionable) | Alimentación automática | Sí |
| Espesor de la capa: | 0,3 – 2,0 mm | Contorsión : | Control Wifi |
| Resolución de la posición: | X/Y: 5,86 μm Z: 1,56 μm | Monitoreo de cámaras: | Estándar |
Asegúrese de que su información de contacto sea correcta. Usted mensaje se enviará directamente a los destinatarios y no ser exhibido públicamente. Nunca distribuiremos ni venderemos su personal información a terceros sin Su permiso expreso.
Q1. Are you a factory or a distributor?
IEMAI is a factory specializing in the production of 3D printers and 3D printing filaments.
Q2. What are your delivery terms?
EXW, FOB, CFR, CIF, DDU, etc.
Q3. What is your delivery time?
For samples, we have machines in stock, and we will send them to you as soon as we receive your payment. For large orders, it depends on the quantity. We will confirm with you before signing the contract.
Q4. Can it be produced based on samples?
Yes, we can produce according to your samples.
Q5. How long does it take to print an object?
It depends on the size of the object and the resolution level.
Q6. Do you test all products before shipping?
Yes, we have passed 100% test questions before shipment.
Q7.Can we print our logo or company name on your products or packaging?
Yes, we support OEM service.
Q8. How do you establish a long-term and good business relationship with us?
1. We maintain good quality and competitive prices to ensure that customers benefit; we are a direct manufacturer of this machine. We have a professional team to ensure the quality of the goods; provide high-quality products that can support all customers to sell goods for a longer time;
2. We respect every customer and treat them as our friends. We conduct business sincerely and make friends with them, no matter where they come from.
3. We provide after-sales service, and we have a technical team that can support all customers to understand the relevant machine installation and operation.
IEMAI is a factory specializing in the production of 3D printers and 3D printing filaments.
Q2. What are your delivery terms?
EXW, FOB, CFR, CIF, DDU, etc.
Q3. What is your delivery time?
For samples, we have machines in stock, and we will send them to you as soon as we receive your payment. For large orders, it depends on the quantity. We will confirm with you before signing the contract.
Q4. Can it be produced based on samples?
Yes, we can produce according to your samples.
Q5. How long does it take to print an object?
It depends on the size of the object and the resolution level.
Q6. Do you test all products before shipping?
Yes, we have passed 100% test questions before shipment.
Q7.Can we print our logo or company name on your products or packaging?
Yes, we support OEM service.
Q8. How do you establish a long-term and good business relationship with us?
1. We maintain good quality and competitive prices to ensure that customers benefit; we are a direct manufacturer of this machine. We have a professional team to ensure the quality of the goods; provide high-quality products that can support all customers to sell goods for a longer time;
2. We respect every customer and treat them as our friends. We conduct business sincerely and make friends with them, no matter where they come from.
3. We provide after-sales service, and we have a technical team that can support all customers to understand the relevant machine installation and operation.
.jpg)
